Standard Stairtreads

Type TH6 is manufactured from press-welded grating with mesh opening size 30 x 67 mm c/c. Type TH6-S is manufactured from the same grating, but is provided with a safety front edge marking the front of the tread and giving increased non-slip properties. Standard stairtreads are hot dip galvanized and kept in stock.

Stairtreads up to 900 mm length have 60 mm high end plates, from length 1000 mm upwards the end plates are 70 mm high. This applies to all types of tread.

Special type treads can be manufactured from grating chosen from Weland grating programme.

Dimensions End Plate

Hole 14 mm dia. for M12 screw

Length (L) mm	Type	Weight Stairtreads (kg/each)
		Tread depth (D) mm
		130	160	200	230	260	300
400 400	TH6 TH6-S	2.1	2.4
400 400	TH6 TH6-S
500 500	TH6 TH6-S	2.4	2.8	3.3
500 500	TH6 TH6-S			3.4
600 600	TH6 TH6-S	2.8	3.3	3.8	4.3	4.8
600 600	TH6 TH6-S	2.9	3.4	3.9	4.4
700 700	TH6 TH6-S	3.6	4.2	4.9	5.5	6.1
700 700	TH6 TH6-S		4.3	5.0	5.6	6.2
800 800	TH6 TH6-S	4.0	4.7	5.4	6.1	6.8	7.5
800 800	TH6 TH6-S			5.5	6.2	6.9
900 900	TH6 TH6-S			6.0	6.8	7.5	8.2
900 900	TH6 TH6-S			6.1	6.9	7.6
1000 1000	TH6 TH6-S			7.8	8.7	9.7	10.8
1000 1000	TH6 TH6-S			7.9	8.8	9.8	10.9
1100 1100	TH6 TH6-S				9.5	10.6	11.7
1100 1100	TH6 TH6-S					10.7	11.8
1200 1200	TH6 TH6-S				10.2	11.4	12.6
1200 1200	TH6 TH6-S					11.5	12.7
1300 1300	TH6 TH6-S
1300 1300	TH6 TH6-S					13.7	15.2
1400 1400	TH6 TH6-S				13.1	14.5	16.2
1400 1400	TH6 TH6-S						16.3
1500 1500	TH6 TH6-S				15.2	17.1	19.0
1500 1500	TH6 TH6-S					17.2	19.1
1600 1600	TH6 TH6-S						20.2
1600 1600	TH6 TH6-S						20.3
1800 1800	TH6 TH6-S						22.5
1800 1800	TH6 TH6-S						22.6

The figures in the table indicate the appproximate weight

= stock dimensions

Risers - Hot dip galvanized

Name	Part.nr	Height (mm)
Risers L=700	14607001	92
Risers L=800	14608001	92
Risers L=900	14609001	92
Risers L=1000	14610001	92
Risers L=1100	14611001	92
Risers L=1200	14612001	92