Pedestrian Walkway Multipanels

Weland Walkway Multipanels are kept in stock for fast delivery, simple design and easy handling.

Walkway Multipanels can also be made to measure for special specifications and requirements.

Advantages of multipanels from stock

  • Quick delivery of ready-sized panels!
  • No waste
  • Easily handled and quick mounted panels
  • No badly exposed cut edges
  • No additional charge for cut-to-length
  • All gratings supplied fully edged.

 

Detailed Data on Stock Formats

  • Smallest Length: 300 mm
  • Largest Length: 2000 mm
  • Available lengths from stock: As per table
  • Standard Width: 1000 mm
  • Grating Height: 25, 30 and 40 mm
  • Mesh Size: H3 c/c 34 x 37 mm, H6 c/c 34 x 75 mm, N6 c/c 17 x 75 mm
  • Surface Treatment: Hot dip galvanized
  • Multipanels are fully edged
  • Kerb angles available to suit. (See Link)

 

These products are available:
Stocked Made to measure
Pedestrian Walkway Multipanels
ZoomIn

Terminology for Pedestrian Walkway Multipanels

Dimensions / Layout

Grating Length
ZoomIn

Grating length = load bearing bar length including edging bar.

Span is the distance between two supports. The grating can be placed across two or more supports.

When indicating the size the length of the load bearing bar is the first figure, e.g. 900 x 1000 mm.

Grating Dimension

Grating Dimension
ZoomIn

The grating dimension is the exact size of the grating panel. The aperture must always be 6 – 10 mm larger than the size of the grating (daylight measure). This applies to both the length and the width.


Width / Finishing Piece

Finishing piece
ZoomIn

The standard width of the grating is 1000 mm.To achieve the full laying measure a finishing piece is often required. Cut the finishing piece close to the next load bearing bar so full edging around the grating is achieved. All cut faces have to be cold galvanized.

Dimensioning

Walkway panel
ZoomIn


Custom-made press-welded Gratings

Weland manufacture a wide range of press-welded gratings in full-size mats measuring 6 x 1 and alternatively 8 x 1 metres with varying mesh sizes and load bearing bars of different height.

Certain types are stocked, for quick deliveries.

Gratings can also be supplied cut-to-size with equally short delivery.

  • Special sizes of kerb angle frames and other sub-structures of steel are manufactured to order.

  • Contact Weland for further information.